Skip to Content
Kenall Manufacturing - Homepage
Main Content

TMLHA12

Millenium Stretch

TMLHA12 Main Image
TMLHA12 Main Image
Model #: TMLHA12
Features:
  • Surface – ceiling or wall mount; 12"×24", 12"×48", 12"×96"
  • ADA Compliant
Application(s):Parking Garage
Stairwells
Transportation Platforms
Underpass and Tunnel
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):12"W
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; maximum driver source of 330μA. Consult factory for flourescent options.
End CapsMarine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™  ready” knockouts visible only from interior of end cap (Flat and Rounded styles only).
HardwareStainless steel, tamper-resistant Torx® fasteners secure lens in housing body's lens channel (eight on 96" housings, four on 48" housings, two on 24" housing).
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes.
LensUV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsUL and CUL listed for Wet Location – ceiling mount. UL certified IP64 per IEC 60598 per IEC 60598 – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. 
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
Reflector Full reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyStandard four-point (24" housing) six-point (48" housings) and twelve-point (96" housing) mounting required for Peace of Mind Guarantee®. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Photometry (IES)

Additional Resources

top